Routing the Gas Line for Traditional Series
The gas and electrical components on a Traditional series
ORTAL fireplace are located in a control box on the left side of
the fireplace.
This control box houses the gas valve, a single gang outlet, and
the electrical receiver. Route the gas line through cut out in
the upper left side of the control box according to local codes
and requirements. Check with your authority having
jurisdiction for more information.
A gas shut-off valve and a 12" gas flex connector are provided with every ORTAL fireplace. The location
of the gas shut-off valve is dependent on local codes and requirements. Check with your authority
having jurisdiction for more information.
44
Ortal Installation Manual: Built-In Models, September 2018