ResMed Mirage Micro User Manual page 9

Removal
To remove the mask, disconnect one of the lower headgear clips and pull
the mask and headgear up over your head.
Disassembly
Refer also to the disassembly illustrations in this user guide.
1. Detach the air tubing.
2. Unclip the headgear clips and unthread the upper headgear straps. It
is not necessary to remove the headgear clips from the headgear.
3. Remove the elbow assembly from the mask frame by pivoting from
the bottom edge.
4. Remove the swivel from the elbow.
5. Note the position on the dial for the next time you use the mask.
Unscrew and remove the dial (a) then pull the forehead support (b)
out of the mask frame.
6. Remove the forehead support pads from the forehead support.
7 . Remove the cushion from the mask frame.
8. Remove the ports cap from the mask frame.
3