Advertisement
Quick Links
Advertisement
Related Manuals for ResMed Nasal Mask Mirage Micro
Summary of Contents for ResMed Nasal Mask Mirage Micro
- Page 1 Mirage Micro™ nasal mask User Guide English...
-
Page 2: Intended Use
Mirage Micro™ nasal mask Thank you for choosing the Mirage Micro™. Intended Use The Mirage Micro channels airflow noninvasively to a patient from a positive airway pressure device such as a continuous positive airway pressure (CPAP) or bilevel system. The Mirage Micro is: •... - Page 3 Flow Generator Settings Select ‘Standard’ (or ‘Vista’ for VPAP Adapt SV™) as the mask option when using the Mirage Micro with ResMed flow generators that have mask setting options. For a full list of compatible devices for this mask, see the Mask/ Device Compatibility List on www.resmed.com on the Products page under...
- Page 4 Fitting the Mask Turn the dial, so that the forehead support is fully extended. Unfasten the Velcro ® pull the upper headgear straps evenly until they are comfortable and firm, and reattach the Velcro. Lie down in your sleeping position. Adjust the dial until the mask is evenly positioned on your face.
- Page 5 Disassembling the Mask Detach the air tubing. Remove the swivel from the elbow. Remove the forehead support pads from the forehead support. Unclip the headgear clips and unthread the upper headgear straps. It is not necessary to remove the headgear clips from the headgear.
- Page 6 Handwash the headgear in warm (approx. 86°F/30°C) water using mild soap. Reprocessing the Mask between Patients This mask should be reprocessed when used between patients. Cleaning, disinfection and sterilisation instructions are available from the ResMed website, www.resmed.com/masks/sterilization/americas. If you do not have Internet access, please contact your ResMed representative.
- Page 7 Reassembling the Mask Insert the ports cap. Insert the forehead support (a) into the mask frame and screw (b) the dial clockwise onto the pole. Turn the dial until it clicks (c). Ensure the dial sits flush against the frame. Insert the assembled elbow into the mask frame.
-
Page 8: Troubleshooting
Troubleshooting Problem Mask won’t seal properly or is uncomfortable Mask is too noisy Dial inserted into mask frame before forehead support Symbols Caution, consult accompanying documents; number; Temperature limitation; contain latex; Indicates a Warning or Caution and alerts you to a possible injury or explains special measures for the safe and effective use of the device. -
Page 9: Limited Warranty
Limited Warranty ResMed warrants that your ResMed mask system, including its components: mask frame, cushion, headgear, tubing and other accessories (“Product”) shall be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase by the initial consumer. - Page 10 Protected by design registrations: AU 304309, CN 200530117106.1, EP 366844, JP 1264474, NZ 406357, US D532512, US D547439, US D545960. Others pending. AutoSet CS, Mirage and Mirage Micro are trademarks of ResMed Ltd. AutoSet CS and Mirage are registered in U.S. Patent and Trademark Office.
- Page 11 618114-Eng/1 08 09 MIRAGE MICRO USER aMER MULTI Global leaders in sleep and respiratory medicine www.resmed.com...
Need help?
Do you have a question about the Nasal Mask Mirage Micro and is the answer not in the manual?
Questions and answers