Operating From The Landing Station Controls - Savaria Telecab17 Owner's Manual

8

Operating from the Landing Station Controls

Figure 3 shows the different types of landing station (hall call) controls.
Figure 3
To operate the Telecab17 from the landing station (hall call) controls:
1 Insert the key into the key switch and turn it clockwise to the operating
position. The key is in the operating position when it cannot be pulled out.
2 Apply constant pressure on the appropriate up/down arrow button to
move the Telecab17 in the desired direction. Note the following:
• The Telecab17 will not move if the door is open.
• The Telecab17 will stop moving in the down direction if the underpan
sensor detects an object underneath it.
• The Telecab17 will stop moving in the up direction if it reaches the
floor plug and the floor plug sensor detects an object on it that weighs
more than 20 lb (9.1 kg).
3 When the cab reaches the landing, the door will unlock automatically.
4 Enter the cab and close the door.
5 Press the appropriate up/down arrow button to travel to the desired
landing.
6 To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
Telecab17 Owner's Manual
4.5"
4.5"
3.75"
3"
Flush mount
2.25"
2.5"
Surface mount
Part No. 001081, 28-m08-2018
3"
6"