Table of Contents
Advertisement
4.
OPERATING THE ELEVATOR FROM THE LANDING CONTROLS
Automatic Operation
1)
Insert the key (if equipped) into the switch on the Hall Call
Station and turn the key to the ON position.
2)
Press the Hall Call button once and release. The elevator
automatically comes to your landing.
4)
If equipped with a manual landing door, turn the door handle
and pull the door open.
5)
If equipped with a manual cab gate, slide the gate open and
enter the cab while closing the landing door behind you.
6)
Once inside the cab, close the gate, insert the key (if equipped)
into the key switch, turn the key to the ON position, and press
the desired floor button.
When using the landing controls, the cab can only be moved
(called) to the level from which you are calling. When using the
control buttons in the cab, the cab can be moved to any level.
WHEELCHAIR WHEELS MUST BE LOCKED AT ALL
NOTE
TIMES WHEN THE ELEVATOR IS MOVING
9 of 14
Advertisement
Table of Contents
