Operating From The Landing Controls - Savaria Orion Owner's Manual

8

3. OPERATING FROM THE LANDING CONTROLS

When using the landing controls, the cab can only be moved
(called) to the level from which you are calling. When using the
COP buttons in the cab, the cab can be moved to any level.
To call the elevator to the appropriate level:
1 Press the CALL button. The cab will automatically stop at your landing.
2 When the cab reaches the landing, the door lock on the landing door will
automatically release, and then:
If the elevator is equipped with our Automatic Two-Speed Horizontal
Sliding Doors, follow this procedure:
a When the elevator reaches the landing, the sliding doors will open
automatically. Enter the cab. The doors will close behind you after a few
seconds. Once inside the cab, lock the wheelchair wheels.
If the elevator is equipped with our Automatic Pro-Doors, follow this
procedure:
b Stay clear of the swing of the landing door. The door will "chime" and
then swing open automatically. If the cab is equipped with an automatic
gate, the gate will open at this time. The door and gate are timed to stay
open for a few seconds. Enter the cab. Once inside the cab, lock the
wheelchair wheels.
If the elevator is equipped with our Manual Pro-Doors, follow this
procedure:
c Pull on the door handle and open the landing door. If the cab is
equipped with a gate, slide the gate open at this time and enter the cab.
Once inside the cab, close the landing door and then the gate. Lock
wheelchair wheels at this time.
Wheelchair wheels must be locked at all times when the
elevator is moving.
Orion Owner's Manual
NOTE
WARNING
Part No. 000586, 18-m09-2018