Operating From The Landing Controls; Operating From The Cop Controls - Savaria Orion LU Owner's Manual

8

3. OPERATING FROM THE LANDING CONTROLS

When using the landing controls, the cab can only be moved
(called) to the level from which you are calling. When using the
COP buttons in the cab, the cab can be moved to any level.
1 To call the elevator to your landing, press the CALL button. The cab will
automatically stop at your landing.
2 When the cab reaches the landing, the door lock on the landing door will
automatically release and the sliding doors will open.
3 Enter the cab. The doors will close behind you after a few seconds.
4 Once inside the cab, lock the wheelchair wheels.
Wheelchair wheels must be locked at all times when the
elevator is moving.

4. OPERATING FROM THE COP CONTROLS

1 If sitting in the cab in a wheelchair, lock the wheelchair wheels. If standing
in the cab, hold on to the handrail.
2 Press the appropriate landing button to "send" the cab to the desired
landing.
3 When the cab reaches the landing, the door lock on the landing door will
automatically release. The door will "chime" and the sliding doors will open.
4 Exit the cab. The doors will close behind you after a few seconds.
Wheelchair wheels must be locked at all times when the
elevator is moving.
Orion Owner's Manual
NOTE
WARNING
WARNING
Part No. 000586-EN, 09-m06-2022