Operation; Operating From The Landing Controls - Savaria Infinity Owner's Manual

4. OPERATION

Operating from the Landing Controls

Automatic Operation
1 If equipped with a key switch, insert the key into the key switch on the Hall
Call station and turn the key to the ON position.
2 Press the Hall Call button once and release. The elevator will automatically
come to your landing.
3 Turn the key (if equipped) to the OFF position and remove the key.
4 If required, turn the door handle and pull the door open.
5 If the cab has a manual gate, slide the gate open and enter the cab.
6 Once inside the cab, close the gate, insert the key (if equipped) into the key
switch, and turn the key to the ON position.
When using the landing controls, the cab can only be moved
(called) to the level from which you are calling. When using the
control buttons in the cab, the cab can be moved to any level.
Wheelchair wheels must be locked at all times when
the elevator is moving.
Constant Pressure Operation
1 If equipped with a key switch, insert the key into the key switch on the Hall
Call station and turn the key to the ON position.
2 Press and hold the Hall Call button until the cab stops at your landing. To
stop the cab at any point simply release the Hall Call button.
3 Turn the key (if equipped) to the OFF position and remove the key.
4 If required, turn the door handle and pull the door open.
5 If the cab has a manual gate, slide the gate open and enter the cab.
6 Once inside the cab, close the gate, insert the key (if equipped) into the key
switch, and turn the key to the ON position.
Part No. 000784, 10-m01-2011
NOTE
WARNING
Infinity & Infinity HD Owner's Manual
9