Operation; Operating From The Landing Controls - Savaria Eclipse Owner's Manual

10

4. OPERATION

Operating from the Landing Controls

1 If equipped with a key switch, insert the key into the key switch on the Hall
Call station and turn the key to the ON position.
2 Press the Hall Call button once and release. The elevator will automatically
come to your landing.
3 Turn the key (if equipped) to the OFF position and remove the key.
4 If required, turn the door handle and pull the door open.
• Note that if you open the door and don't open the gate (or interrupt
the light screen, if equipped), the unit will not take the next call and
will beep three times.
5 If the cab has a manual gate, slide the gate open and enter the cab.
6 Once inside the cab, close the gate, insert the key (if equipped) into the key
switch on the Cab Operating Panel, and turn the key to the ON position.
When using the landing controls, the cab can only be moved
(called) to the level from which you are calling. When using the
control buttons in the cab, the cab can be moved to any level.
Wheelchair wheels must be locked at all times when the
elevator is moving.
Eclipse (Micro-6) Owner's Manual
NOTE
WARNING
Part No. 000841, 12-m01-2018