Installing The Shipping Bracket - HPE Apollo k6000 User Manual

Installing the shipping bracket

IMPORTANT: Before you prepare the populated rack for shipping, you must install shipping brackets.
You will need to install a shipping bracket on each side of each chassis to secure all the servers.
Procedure
1. Eject the servers but do not remove them from the chassis.
2. Line up the slots on the shipping bracket with the server release levers.
3. Insert the end of the server release level into the corresponding slot on the shipping bracket.
4. Secure the shipping bracket to the chassis by tightening the thumbscrews on the bracket.
Installing the shipping bracket 27