Cisco ASR 9000 Series Configuration Manual page 62

Specifying an Alternate Storage Location for Configuration Files
Command or Action
enabled are:
console baud: 9600
boot: the ROM Monitor
do you wish to change the configuration? y/n
[n]: y
enable "diagnostic mode"? y/n
change console baud rate? y/n
change the boot characteristics? y/n
enter boot type:
0 = ROM Monitor
2 = MBI Validation Boot Mode
[0]: 0
Step 3 Enter the boot type as 0.
Example:
enter boot type:
0 = ROM Monitor
2 = MBI Validation Boot Mode
[0]: 0
Step 4
reset
Example:
rommon B3> reset
Step 5
confreg
Example:
rommon B1 >
Configuration Summary
(Virtual Configuration Register: 0x1920)
enabled are:
console baud: 9600
boot: the ROM Monitor
do you wish to change the configuration? y/n
[n]: y
enable "diagnostic mode"? y/n
change console baud rate? y/n
change the boot characteristics? y/n
enter boot type:
0 = ROM Monitor
2 = MBI Validation Boot Mode
[0]: 2
Step 6 Enter the boot type as 2.
Example:
enter boot type:
0 = ROM Monitor
2 = MBI Validation Boot Mode
[0]: 2
Step 7
set
Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x
54
[n]:
[n]:
confreg
[n]:
[n]:
Purpose
The configuration register is not an environment variable like
TURBOBOOT. Do not enter an equal sign when entering the
confreg command.
n
n
[n]: y
Sets the boot type as 0 to enable ROM Monitor mode during
the next system boot.
Makes the configuration register settings for the standby RSP
card effective.
Sets the active RSP configuration register to EXEC mode. You
can also change the console baud rate, boot characteristics, boot
type configuration settings, and enable diagnostic mode at the
ROM Monitor mode.
n
n
[n]: y
Sets the boot type as 2 for the active RSP to enable MBI
validation mode or the EXEC mode during the next system
boot.
Displays the current environment variable settings.
Managing Configuration Files in ROM Monitor
OL-30420-01