Components; Cm1164A / Cm1284 Front View - ATEN Multi-View KVMP Switch User Manual

Components

CM1164A / CM1284 Front View

No. Component
1 KVM Status Panel This panel contains LED icons that light to indicate mode
2 KVM Port
Selection
Pushbuttons
3 Mode Selection
Pushbutton
4 OSD (Esc) button Press this to invoke the on-screen display (OSD) Menu.
5 Select button
1
3
2 2
and port status. The Mode and KVM Port Selection
Pushbuttons each have three corresponding LED icons
that represent audio, KVM, and USB Link status. See
Display Modes, page 34, for full details.
Press the KVM Port Selection Pushbuttons to manually
switch ports. See Display Modes, page 34, for full
details.
In a cascade setup, press a KVM Port Selection
Pushbutton to switch the console display to the
corresponding secondary KVMP
Press and hold KVM Port Selection Pushbuttons 1 and
2 simultaneously for 2 seconds to start Auto Scan Mode.
See Auto Scanning, page 52, for full details.
Press and hold KVM Port Selection Pushbuttons 3 and
4 simultaneously for 2 seconds to detect the console
keyboard and mouse again.
This pushbutton allows you to cycle through the three
modes of focus – KVM, stereo audio, and USB Link.
When the OSD Menu is enabled, press the OSD button to
go back to the previous menu/submenu.
Press this to select an option in the OSD Menu.
Chapter 1. Introduction
4
5 6 7 8
Description
TM
Switch.
9
7