About This Manual - ATEN Multi-View KVMP Switch User Manual

About this Manual

This User Manual is provided to help you get the most from your system. It
covers all aspects of installation, configuration, and operation for the following
models of the Multi-View KVMP
Model
CM1164A
CM1284
An overview of the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the Multi-View KVMP
Switch. Its purpose, features and benefits are presented, and its front and back
panel components are described.
Chapter 2, Hardware Setup, describes how to set up your installation.
Diagrams showing the necessary steps are provided.
Chapter 3, Basic Operation, explains the fundamental concepts involved
in operating the Multi-View KVMP
Chapter 4, Keyboard Port Operation, details all of the concepts and
procedures involved in the hotkey operation of your Multi-View KVMP
Switch.
Chapter 5, OSD Operation, provides a complete description of the
Multi-View KVMP
with it.
Chapter 6, RS-232 Commands, provides details on the functions and
RS-232 commands that you can use to control the Multi-View KVMP
using a serial controller.
Chapter 7, Maintenance, provides step-by-step information on firmware
upgrades, restoring the device default, and how to safely restart your Multi-
View KVMP Switch.
TM
An Appendix, provides specifications and other technical information
regarding the Multi-View KVMP
Switch:
TM
4-Port USB DVI Multi-View KVMP
4-Port USB HDMI Multi-View KVMP
TM
Switch's On-Screen Display (OSD), and how to work
TM
Switch.
TM
Multi-View KVMP
Product Name
TM
TM
Switch.
TM
Switch User Manual
Switch
Switch
TM
TM
Switch
TM
ix