Log In - ATEN Multi-View KVMP Switch User Manual

TM
Multi-View KVMP

Log In

The Login command allows you to log in to the Multi-View KVMP
and begin sending RS-232 commands. When you log in, the RS-232 link is
"opened" and the Multi-View KVMP
pushbuttons, hotkeys, OSD, or remote control signals - until the RS-232 link is
closed (see Open/Close RS-232 Link, page 70). For username/password
information, see Security, page 81. Type your command in the following
format:
Command + Control + Number + [Enter]
Command
login
Control
p
Number
xxxxxx
For example, to login to the system with the password 123456, type the
following:
login p123456 [Enter]
Note: Each command string can be separated with a space.
68
Switch User Manual
Login Command
Input password
Stands for the 6 digit password, x= 0~9
Switch will not respond to front panel
TM
Description
Description
Description
Switch
TM