Hardware Torque; Individual Batteries - Taylor-Dunn E-451 Service And Parts Manual

Batteries

Individual Batteries

WARNING
Individual batteries can weight up to 80 pounds or
more. To avoid injury, use proper lifting techniques
or a hoist to remove the battery.
1: Using an insulated wrench, disconnect the cables
from the battery to be removed.
2: Using a battery lifting strap, remove the battery
from the vehicle.
3: Inspect the battery compartment for corrosion. If
there is significant corrosion, all batteries should
be removed and the compartment cleaned and
painted.
4: Install the battery and torque the battery terminal
hardware per torque listed in the Hardware
Torque table at the end of this section.
Page 78

HARDWARE TORQUE

If hardware is not listed here, refer to standard torque
values in the appendix.
Description
Battery terminal, Trojan bolt
Battery terminal, Trojan stud
Battery terminal, T/D bolt
E-451 & E-457
Inch Pounds Newton Meters
95-105 11-12
95-105 11-12
168 19
ME-45X-01