Federal Communication Commission Interference Statement - SMART Board 7000 series Installation And Maintenance Manual

IMPORTANT INFORMATION
You must connect the USB cable that came with the display to a computer that has a USB
l
compliant interface and that bears the USB logo. In addition, the USB source computer must
be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or UL Mark(s) for
CSA/UL 60950. This is for operating safety and to avoid damage to the display.
Wait five minutes before removing the iQ appliance (AM50) from the display to allow the iQ
l
appliance (AM50) to cool.
IMPORTANT
The following are the normal operating power requirements for the display:
l
Model
SBID-7075
SBID-7086
SBID-7275
SBID-7286
SBID-7375
SBID-7386
SBID-7075P
SBID-7086P
SBID-7275P
SBID-7286P
SBID-7375P
SBID-7386P
For additional requirements and other information, refer to the display's specifications (see
l
More information on page 8).
Federal Communication Commission
interference statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
iii smarttech.com/kb/171164
Power requirements
100V to 240V AC, 50 Hz to 60 Hz, 147 W
100V to 240V AC, 50 Hz to 60 Hz, 172 W
100V to 240V AC, 50 Hz to 60 Hz, 162 W
100V to 240V AC, 50 Hz to 60 Hz, 187 W
100V to 240V AC, 50 Hz to 60 Hz, 162 W
100V to 240V AC, 50 Hz to 60 Hz, 187 W
100V to 240V AC, 50 Hz to 60 Hz, 147 W
100V to 240V AC, 50 Hz to 60 Hz, 172 W
100V to 240V AC, 50 Hz to 60 Hz, 162 W
100V to 240V AC, 50 Hz to 60 Hz, 187 W
100V to 240V AC, 50 Hz to 60 Hz, 162 W
100V to 240V AC, 50 Hz to 60 Hz, 187 W