Heat Output Adjustment; Fan Operation; Remote Control Operation - Osburn Cordova Series Installation And Operating Instructions Manual

The valve supplied with the appliance has a knob to control the heat output and flame height (see
H /L
I O
Figures 2 & 3).
2.4 F O
AN PERATION
For units equipped with a fan control knob, the knob is located behind the access door and may be adjusted
to the following settings:
OFF: Turn the control fully counter-clockwise until the switch operates.
Variable Speed Setting:
Turn the control to the desired setting. When the knob is turned fully clockwise the fan will be set to
minimum speed.
For units equipped with a fan switch, the fan may be switched between the and
"O " "A "
FF UTOMATIC
settings.

2.5 Remote Control Operation

f i r e - p a r t s . c o m
An optional hand held remote control kit for turning the unit On and Off is also available. Detailed
instructions for the optional Remote Control are included with the kit.
/10