Coal And Ember Placement - Osburn Cordova Series Installation And Operating Instructions Manual

3.3.8.2 Coal and Ember Placement

The Cordova Series has been designed to allow for the application of coals and ember medium. For best
results, the coals should not be placed directly over any parts, but instead located near the ports. The fibre
medium may then be placed loosely over the ports (see Figure 20). N
HOLE THROUGH WHICH THE FLAME IS MEANT TO PASS THROUGH
place any ember medium over the holes directly underneath this log as it will improperly affect the
D N
O OT
flame appearance.
N :
T
OTE
HE FRONT OF THE BURNER HAS BEEN DESIGNED TO ALLOW FOR THE APPLICATION OF EMBER MEDIUM
AS WELL AS THE AREA TO THE LEFT OF THE CENTRE LOG AND IN FRONT OF THE REAR LOG
EMBER MEDIUM BETWEEN ANY OTHER LOGS
N : I
OTE F THE EMBER MEDIUM BLOCKS THE PORTS
REMEDIED BY LOCALLY REMOVING THE EMBER
W : D
ARNING O NOT ADD ANY MATERIAL TO THE APPLIANCE WHICH WILL COME IN CONTACT WITH THE
,
FLAMES OTHER THAN THAT SUPPLIED BY THE MANUFACTURER WITH THE APPLIANCE
f i r e - p a r t s . c o m
.
.
,
A TRANSLUCENT FLAME MAY RESULT
A
WAY FROM THE PORT
Figure 20
:
T
OTE HE CENTRE LOG HAS A KNOT
. D
O
. T
.
.
-
N
OT PLACE
HIS CAN BE
/23