3.3.8.3 Installing The Lower Door Trim
W
: See sections 4.4 & 4.5 before installing the lower door trim
ARNING
1. Place the lower door assembly upside down on a soft work area.
2. Remove the four retaining screws from the doorframe bottom.
3. Place the lower door trim in position over the door assembly and align the screw holes.
4. Secure the lower door trim with the four screws that were previously removed (See Figure 21).
5. Re-attach the door assembly onto the firebox.
f i r e - p a r t s . c o m
Figure 21
/24