Installing The Door; Installing The Vertical Trims (Contemporary Grille Kits Only); Installing The Top Grille Assembly - Osburn Cordova Series Installation And Operating Instructions Manual

Gas fireplace inserts
Table of Contents

Advertisement

3.3.8.4 Installing the Door

Install the door by assembling its upper hinge slots to the hinge tabs on the top of the firebox. Swing the
door down towards the fireplace and latch at the bottom.

3.3.8.5 Installing the Vertical Trims (Contemporary Grille Kits Only)

Once the lower door trim has been attached to the door and the door installed, the vertical trims may be
attached. Attach one magnet each (two supplied) to the inside surface of the trim pieces. Locate the tongued
end of each trim into the slot of the lower trim and rotate towards the unit
Next, follow the instructions for attaching the top louvres. When properly installed these will capture the top
of the vertical trims behind the upper trim of the louvre stack.
N
: A
OTE
LL EDGES ARE TO BE FLUSH WHEN
.
COMPLETE
f i r e - p a r t s . c o m

3.3.8.6 Installing the Top Grille Assembly

1. Place the top grille assembly above the door.
2. Push the grille retaining plate into the clips and against the stops on top of the insert (see
Figures 22a & b).
NOTE:
Improper installation of the top grille assembly may cause tarnishing of the brass.
Figure 22a Flush
Figure 22b Bay
/25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents