4018M
5.2.7
@AAN
Name
Description Request the number of standard records stored in the analog
Syntax
Response
Example
ADAM-4000 Series User Manual
Standard Record Count command
input data logger at address AA.
@AAN (cr)
@ is a delimiter character
AA (range 00-FF) represents the 2-character hexadecimal
address of an analog input data logger.
N is the Standard Record Count command.
(cr) is the terminating character, carriage return (0Dh).
!AAHHHH(cr) if the command is valid.
! is a delimiter character indicating a valid command was received.
AA (range 00-FF) represents the 2-character hexadecimal
address of an analog input module.
HHHH represents the 4-character hexadecimal number of
data records stored in the analog input data logger at address AA.
(cr) is the terminating character, carriage return (0Dh).
command: @A3N(cr)
response: !A30320(cr)
The command requests the number of data records stored in
the analog input data logger at address A3.
The module currently has 800 data records.
152