Analog Input Data Logger Command Set; Aacccsdmtttt - Advantech Adam 4000 Series User Manual

5.2

Analog Input Data Logger Command Set

Command Syntax
@AACCCSDMTT TT
@AAD
@AASO
@AAT
@AAL
@AAN
@AARNNNN
@AAACSDHHHH
TEIIII
@AABC
4018M
5.2.1

@AACCCSDMTTTT

Name
Description Sets the channel storage status, standalone mode, data
Syntax
Command Name Description
Set Memory
Configuration
Read Memory
Configuration
Set Memory
Operation Mode
Read Memory
Operation Mode
Event Record
Count
Standard Record
Count
Read Record
Content
Set Alarm Limit
Read Alarm Limit Read the high/low alarm settings
Set Memory Configuration command
logger mode storage type and sampling interval for the
specified analog input data logger.
@AACCCSDMTTTT(cr)
@ is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address of an analog input data logger.
C is the Set Memory Configuration command.
CC (range 00-FF) represents the data storage status of each
channel. The ADAM-4018M has 8 channels, bit 0
representing channel 0, and bit 7 representing channel 7. A
mask bit value of '1' enables data storage in the specified
channel, while a mask bit value of '0' disables data storage.
Set the channel storage status,
standalone mode, data logger
mode, storage type and sampling
interval for the specified analog
input data logger.
Return the configuration parame-
ters for the specified analog input
data logger.
Start/stop the recording function
of the memory module.
Read the recording status of the
memory module.
Read the number of stored event
records in the memory module.
Read the number of stored
standard records in the memory
module.
Read the contents of the specified
record.
Set the high/low alarm settings for
the specified channel.
for the specified channel.
145 ADAM-4000 Series User Manual
I/O Module
4018M
4018M
4018M
4018M
4018M
4018M
4018M
4018M
4018M