Table 4.19: Adam-4052 Command Table - Advantech Adam 4000 Series User Manual

Table 4.19: ADAM-4052 Command Table

Command Syntax Command Name
%AANNTTCCFF
$AA6
#**
$AA4
$AA2
$AA5
$AAF
$AAM
$AAXnnnn
$AAY
Table 4.20: ADAM-4053 Command Table
Command Syntax Command Name
%AANNTTCCFF
$AA6
#**
$AA4
$AA2
$AA5
$AAF
$AAM
ADAM-4000 Series User Manual
Command Description
Sets address, baud rate, and/or
Configuration checksum status, to a digital I/O
module
Returns the values of the digital I/O
Digital Data In
channels of the addressed module
Orders all digital I/O modules to
Synchronized
sample their input values and store
Sampling
them in a special register
Return the value of a specified digital
Read Synchronized
I/O module that was stored after an
Data
#** command was issued
Returns the configuration parame-
Configuration Status
ters of a specified digital I/O module
Indicates whether a specified digital I/
Reset Status O module was reset after the last time
the $AA5 command was issued
Read Firmware Return the firmware version code
Version from the specified digital I/O module
Return the module name from the
Read Module Name
specified digital I/O module
Set communication WDT cycle time
Watchdog Timer from 0000 ~ 9999 (unit: 0.1 second. if
Setting value is 0000, the communication
WDT function will be disable)
Read Watchdog Read the cycle time setting of
Timer Setting communication WDT
Command Description
Sets address, baud rate, and/or
Configuration checksum status, to a digital I/O
module
Returns the values of the digital I/O
Digital Data In
channels of the addressed module
Orders all digital I/O modules to
Synchronized
sample their input values and store
Sampling
them in a special register
Return the value of a specified
Read Synchronized
digital I/O module that was stored
Data
after an #** command was issued
Returns the configuration parame-
Configuration Status
ters of a specified digital I/O module
Indicates whether a specified digital I/
Reset Status O module was reset after the last time
the $AA5 command was issued
Read Firmware Return the firmware version code
Version from the specified digital I/O module
Return the module name from the
Read Module Name
specified digital I/O module
106
Page No.
7-4
7-6
7-11
7-12
7-14
7-16
7-18
7-19
7-27
7-28
Page No.
7-4
7-6
7-11
7-12
7-14
7-16
7-18
7-19