wtw inoLab pH/ION Level 2 Operating Manual page 68

What to do if...
Integrated printer
does not print
Integrated printer
prints automatically
Print key
does not react
Printer operating -
paper not
being printed
StoFull message StoFull StoFull StoFull
152
Cause
– Printer switched off
– No mains power supply
connected
– Interface cable
connected
– No paper available
– AutoStore function is
switched on with a longer
interval duration (Int 1)
Cause
– AutoStore function
(Int 1) or Data
transmission (Int 2) is
switched on
f
Cause
– Printer is switched on
– Interface cable
connected
Cause
– Paper inserted with
wrong side upwards
Cause
– All 800 memory locations
are full
Remedy
– Switch on printer
– Connect mains power
supply
– Unplug cable
– Replace roll of paper
– Switch off AutoStore
function
Remedy
– Switch off functions
Remedy
– Switch off printer
– Unplug cable
Remedy
– Turn the roll of paper
around and insert it with
the other side upwards
Remedy
– Output data store and
clear data store