Reset - wtw inoLab pH/ION Level 2 Operating Manual

Measuring parame-
ters
Configuration
parameters

4.10 Reset

You can reset (initialize) measuring and configuration pa-
rameters separately from one another.
The following measuring parameters (pH InI) are reset to the
values they had on delivery:
Measuring mode
Asymmetry
of the pH electrode
Slope of the pH electrode
pH calibration procedure
Temperature, manual
Resolution of
pH display
Note
When the measuring parameters are reset, the calibration
data are lost. After the parameters have been reset, cali-
brate!
The following configuration parameters (InI) are reset to the
values they had on delivery:
Baud rate
Interval 1
(automatic storing)
Interval 2
(for data transmission)
pH
0 mV
-59.16 mV/pH
AutoCal TEC
25°C
0.001
4800
OFF
OFF
Operation
141