a
2 Press the
Int 2 appears on the display.
u d
3 Press
tween storage processes.
4 Confirm with
The instrument changes automatically to the measur-
ing mode.
Note
If the AutoStore function is active, the data transmission is
performed according to the setting of the storage interval
(Int 1). Set the storage interval (Int 1) to OFF to activate the
data transmission interval (Int 2).
Note
You can also set the data transmission interval (Int 2) in the
Configuration menu (see page 137).
key.
to set up the required time interval be-
g
.
Operation
133