Set Station Run Times; Operating The Controller; Off Mode; Set The Station Run Time(S) - Rain Bird E-6C User Manual

Set Station Run Times

DIAGRAM 16
1. Turn the programming dial to STATION RUN TIME.
2. The program letter (A, B, or C), the number “1” (indicating
the station number), and “0 00” appear in the display.
3. Press + or - to set the run time for station number 1. You
can set a station to run from 0 minutes up to 240 minutes
(four hours), in one-minute increments. All run times
display in minutes (for example, a two hour run time will
appear as 120 minutes).
NOTE: If you do not want to include a particular
station in the selected program, set that station’s
run time to zero (0 00).
4. Press ENTER to display additional stations. Repeat steps 3
and 4 to set a run time for each station.
You have now completed all programming steps for one
program. If you are finished programming, turn the
programming dial to the AUTO position to run all programs
automatically. If you want to enter settings for another program,
repeat the programming instructions, beginning with “Select
Program (A, B, and/or C)” on p. 14.
Ec Controller

OPERATING THE CONTROLLER

After programming the controller, you will normally set it to
AUTO mode to operate all programs automatically. You can
manually run one or more programs, or manually run a single
station or several stations.
In addition, you can adjust the Water Budget to increase or
decrease the run time of all programs by a selected percentage
(in 10% increments). You may also wish to run a test program
to make sure all sprinklers in the system operate properly.

Off Mode

DIAGRAM 17
1. To turn the controller off and suspend all watering, turn the
programming dial to OFF.
2. In the OFF position, the LCD displays “OFF.” The
controller remembers the current time and date and retains
all programming, but no watering occurs. You may wish to
turn the controller off during a rainy period, or for any day(s)
when you do not want watering programs to run as
scheduled.
17