Finish The Inside - Real Good Toys Beachside Bungalow Instructions Manual

Instructions for kit #B 1895
Finish the Inside...Plan Ahead!
Interior finishing involves so many choices! Will this house
be a play-house or a display for miniatures? What accessories
will be used and where will they go? Wiring? Wallpaper? Tile
or carpeting? Every choice makes a difference in the order of
finishing. Real Good Toys has provided materials for some
basic interior work, but you may choose to do it differently.
Make your choices
Get your materials
Test your layout
With the pieces in your hands, imagine the steps to get to
where you want to be.
Now you're ready for your order of interior finishing.
Here's the order that our assembly pro follows for tackling
most custom interior finishing:
• Dividers
• Electrical wiring (using "tape" style wiring)
• Wallpaper
• Interior Window Trim
• Flooring
• Stairs
• Baseboard and crown moldings
□
34. Lay out the Dividers without glue... straight front-to-back
and up-and-down; use a Divider or Attic Divider as a square for
positioning a Divider; mark its location, then switch - using the
second Divider to mark the first's position, until they are all marked.
To glue Dividers in, apply glue, tip the Divider and put it almost
all the way in, set the base, lift the floor or roof above for some
clearance, tip the Divider upright, and slide it the rest of the way
in place, clean-up the excess glue.
□
35. Set the Window Panes in
the cutouts. Glue and tape the
Interior Frames to the wall. Look
inside the window to line up the
inside edge of the interior frame
with the inside edge of the outside
frame.
Glue and tape the Door Interior
Trim to the door and the wall.
That's it! You're done with the House Assembly
part of your dollhouse project.
Have fun with the rest!
□
a
Bottom Stair Blocks. Let the glue dry.
Glue the Stairs to the floor and wall, lined up with
the Mid Floor's top.
Test the Stringer on the edge of the Stairs, lined up
at the bottom. Mark, then cut the Stringer. Glue
the Stringer to the Stairs.
Bottom Stair Block
Attic Divider
Stairs
Stringer
36. Glue and tape together the Top and the
Top Stair Block
Stringer
Bottom Bevel
Cut
Divider
page 26
Top Bevel
Middle Bevels