Instructions for the Special Edition Vermont Farmhouse Jr
Finish the Outside
Special Feature
Gingerbread is Pre-Cut and Ready to Use
�
41. Paint and install the Gable Gingerbread to the edge
of the Gable Roofs, covering the edges of the shingles.
�
42. Paint and install the Eave Gingerbread to the edges
of the Roofs, covering the edges of the shingles.
�
43. Cut one end of each piece of Stripwood to match
the Stripwood angle pattern.
(Illustration #39)
Paint and attach the Stripwood to the front and back
edges of the Sides (Illustration #40). Cut off the bottom
edges to fit.
Illustration #39
Stripwood cutting pattern
E4152
Left Eave
Gingerbread
Gable Gingerbread
Gingerbread and Stripwood
E4154
Left Gable
Gingerbread
Illustration #40
Gingerbread and Stripwood
Page 20
Eave Gingerbread
Stripwood