Brackets; Window Assembly - Real Good Toys Beachside Bungalow Instructions Manual

Instructions for kit #B 1895
a

Brackets

The easiest and strongest bracket construction is
with first-coated parts that have been sanded.
□
23. Arrange a backstop that makes a right angle (90
the work surface. Protect the work surface with waxed paper.
Glue together 14 Bracket Bases and Struts. Clean up the glue
excess (a paint brush and cup of water); let the glue dry.
□
24. Glue a Bracket Cap to each Bracket Base/Strut. Make:
5) 49 o Brackets Left (flat is on top)
5) 49 o Brackets Right (flat is on top)
2) 35 o Brackets Left (flat is on the left)
2) 35 o Brackets Right (flat is on the right)
"Flat"
49 o Bracket Left
dhbuilder.com has more window assembly photos
□
a
25. Glue and tape together the window frame sets. Turn the
frames over and stretch a rubber band around the lip on the inside.
Make:
1) frame using 6" and 5" Window Frames
1) frame using 6" and 4" Window Frames
Turn the Window Frame sets back over, and glue Middle Frames into
each window. Space the Middle Frames using the 1
□
26. Glue and tape together Interior Trim. Window Panes and
interior trim will be installed as part of the Interior Finishing Plan
(see the page 26).
Interior Trim
49 o Bracket Right
35 o Bracket Left
35 o Bracket Right
If a Bracket needs a little adjustment to straighten it, a few seconds
in a microwave will warm and soften the glue.
5 seconds or so... too much heat will scorch the paint.

Window Assembly:

o
) with
Strut
Backstop
1 / " Spacer.
2
Temporary use of the Spacer to
locate the Middle Frames
This is a cross-section from the top
of how the windows will be installed
Interior Trim
Window Frame
Bracket Base
Strut
Bracket Base
Bracket
Cap
Window Frame
Spacer
Middle Frame
Window Pane
page 19