Real Good Toys Beachside Bungalow Instructions Manual page 10

Instructions for kit #B 1895
□
a
6. Glue, tape, and weight the Porch Floor to the Foundation,
carefully lined up on the edges. Finish painting the Porch Floor
before you attach the housebody to this assembly.
Wiring? Some of the steps are easiest before and
during assembly. See www.realgoodtoys.help to
plan your wiring project
□
a
7. A. Spread glue in the grooves of both Sides. Tape the Base
Floor to the Sides, lined up in back (the floor sticks out
front). Make sure the Floor is all the way to the top of the Sides'
grooves.
B. Set the Mid Floor into the grooves lined up in back (the floor
sticks out 1 / " in front), and with the stairhole closer to the front
16
(up). Hold the Sides tight onto the Mid Floor with a piece of tape
above where the Front will attach so the tape won't be in the way.
C. Glue and tape the Groove-Fill into the exposed groove within the
stairhole.
Step 7A: front edges are up
The Base Floor sticks out
1 / " in front
16
1 /
16
Base Floor
Step 7C: Groove Fill
Step 6
Porch Floor
Lined Up!
" in
Step 7B: front edges are up
The Mid Floor sticks out
1/ 16 " in front
page 10
Base Floor temporarily
taped to the Foundation
to hold it square
Tape
Stair hole is to the Front