Instructions for kit #B 1895
□
16. Cut wide Stripwood (
the Stripwood against the Side, lined up at the back edge and
bottom. Use the top of the Side and Front wall as a cutting guide
- cut the Stripwood with a fine-tooth saw (like the X-Axto razor
saw) Save the cutoffs for Dormer Trim
Cut a Side Trim pair for the other side too. Glue and tape the Trim
to the Sides
□
17. Glue and tape the Rear Roof to the Sides
and Attic Ceiling, lined up at the top and centered
side-to-side (1
1
/
" overhang).
2
The bevel on the top of the Rear Roof
lines up with the front edge of the Side
3
/
x
7
/
) for the Side Trim. Hold
32
16
Detail of Trim
Use the top of the wall as
a cutting guide
Step 16
Side Trim
Lined up at the bottom
This piece of tape keeps the
Rear Roof from slipping down
page 16