Important Safety Instructions - Panasonic KX-HTS824 Getting Started

1.2 Important Safety Instructions

•
For grounding wire, green-and-yellow insulation is required, and the cross-sectional area of the conductor
must be more than 0.75 mm
Notice
For All Telephone Equipment
•
Read and understand all instructions.
For the PBX
•
Keep the unit away from heating appliances and devices that generate electrical noise such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of
the PBX.
•
If you are having problems making calls to outside destinations, follow this procedure to test the
trunks:
a.
Disconnect the PBX from all trunks.
b.
Connect known working SLTs to those trunks.
c.
Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the trunk that the SLT is
connected to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the
trunks until it has been serviced by an authorized Panasonic Factory Service Center.
1.2 Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons, including the following:
•
Do not use the product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool.
•
Avoid using wired telephones during an electrical storm. There is a remote risk of electric shock from
lightning.
•
Do not use a telephone in the vicinity of a gas leak to report the leak.
14 Getting Started
or 18 AWG.
2
SAVE THESE INSTRUCTIONS