3.5.2 LAN Connections for SIP Extension
Example: KX-HDV230
A
Ethernet Straight Cable
(1)
To a Switching Hub
Connecting a PC to an SIP Extension
You can connect a PC to some SIP Extensions using the SIP Extension's secondary port. In this case, only
a single port from the LAN's network interface (switching hub) is required to connect both the SIP Extension
and PC to the LAN.
Note
•
Use an Ethernet straight cable with an RJ45 connector to connect a PC to the SIP Extension. The
cable should be a CAT 5 (Category 5) or higher for 10BASE-T/100BASE-TX, or CAT 5e (Enhanced
Category 5) or higher for 1000BASE-T.
•
Only a PC can be connected to the secondary port of an SIP Extension. Other SIP Extensions or
network devices such as routers or switching hubs, cannot be connected.
•
In cases where a PC is connected to the secondary port, if the SIP Extension connection to the PBX
is disconnected or reset, LAN communication to the PC will also be disrupted.
78
Getting Started
A
(1)
B
B
(2)
(2)
AC Cord Adaptor
To Wall Socket