Panasonic KX-HTS824 Getting Started page 41

Closing the front cover
1.
Close the front cover. Then, close the cable cover turning 90 degrees as shown below.
2.
Turn the screws clockwise to tighten them.
3.
Slide in the cable cover and turn the screws clockwise to tighten them. Then, close the screw cover.
CAUTION
For safety reasons, fix the front cover and cable cover of the PBX with screws.
Removing/Attaching the Cable Cover
If you prefer, you can remove the cable cover.
3.2.3 Opening/Closing the front cover
Getting Started 41