Panasonic KX-HTS824 Getting Started page 73

KX-HTS 1.
Setup/
preparation
2.
Terminal 3.
Setup/
preparation
4.
Remarks KX-HDV series is
automatically registered to
the extension port with SIP
extension port attribute.
•
Connect an existing LAN to the WAN port of HTS.
•
Connect the IP extension, Communication IP Camera/Video doorphone, and 3rd party SIP to an existing
LAN port, and connect it to KX-HTS.
KX-HDV series
Set the DHCP Mode
of KX-HTS series LAN
side to Server.
Refer to 3.3.1 Network
Configuration—[4-2]
LAN—LAN Settings—
DHCP Mode in
Programming Item
List.
Connect KX-HTS series LAN port to existing LAN network.
Initialize the KX-HDV
series terminal. For
further information,
refer to the KX-HDV
series manual.
Connect KX-HDV
series to existing LAN
network.
*1
Terminal
KX-NTV series
1. Enter your password to Registration Password of the
SIP extension port.
Refer to "2.3.1 PBX Configuration—[2-1] Extension
—Port-SIP Extension—Registration Password" in
Programming Item List.
3. In the web settings of
KX-NTV series, set
the KX-HTS LAN IP
address and
Registration
Password.
4. Connect KX-NTV
series to existing LAN
network.
The terminal is registered to the SIP extension port to
which the Registration Password is entered.
3.5.1 Connecting SIP Extensions
3rd party SIP
3. In the web settings of
3rd party SIP terminal,
set KX-HTS LAN IP
address and
Registration
Password.
4. Connect 3rd party SIP
terminal to existing
LAN network.
*1
Getting Started 73