3.13 WAN Connection
3.13 WAN Connection
Description
The following WAN connection types are supported.
WAN Type
Dynamic IP Address
Static IP Address
PPPoE
You can confirm the current connection status of the WAN interface in Web Maintenance Console.
For details about the WAN Status, refer to "3.2.2 Network Configuration—[3-2] WAN—WAN Status" in the
Programming Item List.
Conditions
•
If the LAN2/WAN2 port attribute is changed, you must perform a System Reset and restart the PBX
before the setting can be applied.
•
For details about what values to use for configuring the protocol for specifying an IP address, consult the
network administrator.
98
Getting Started
Retrieves an IP address dynamically from a DHCP server.
Sets a static IP address.
Obtains an IP address dynamically from a PPPoE server.
Description