TEMPLATE FOR WALL MOUNTING
1.
Copy or print this template and place it on the
wall.
2.
Install the screws as marked. If you mount the
main unit on a concrete, fit anchor plugs (not
included) into the wall beforehand.
3.
Hook the unit onto the screw heads.
Note
•
Make sure to set the print size to correspond
with the size of this page.
•
If the dimensions of the paper output still
deviate slightly from the measurements
indicated here, use the measurements
indicated here.
A 225mm (8-7 / 8 in)
(1) Install a screw here.
(1)
A
(1)
Note
Getting Started
113