Using The Software - AEMC Simple Logger CL600 User Manual

4.3

Using the Software

Launch the software and connect the RS-232 cable from your computer
to the logger.
NOTE: The first time the program is launched you will need to select a
language.
Select Port from the menu bar and select the Com port (COM 1, 2 3 or 4)
you will be using (see your computer manual). Once the software automati-
cally detects the baud rate, the logger will communicate with the computer.
(ID number of the logger and number of points recorded displayed).
Select download to display the graph. (Download takes about 90 sec-
onds.)
10
RMS Clamp-on Simple Logger® Model CL600