IEI Technology TANK-860-HM86 Series User Manual page 103

TANK-860-HM86 Em be d d e d S ys te m

9600

19200

38400

57600

115200

Da ta Bits [8]
Use the Data Bits option to specify the number of data bits.

7

8

P a rity [No n e ]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.

None

Even

Odd

Mark

Space

Sto p Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
The transmission speed is 9600
The transmission speed is 19200
The transmission speed is 38400
The transmission speed is 57600
D The transmission speed is 115200
EFAULT
Sets the data bits at 7.
D Sets the data bits at 8.
EFAULT
D No parity bit is sent with the data bits.
EFAULT
The parity bit is 0 if the number of ones in the data
bits is even.
The parity bit is 0 if the number of ones in the data
bits is odd.
The parity bit is always 1. This option does not
provide error detection.
The parity bit is always 0. This option does not
provide error detection.
P a g e 91