Upgrade; Parameter Management - Value-Top VT-1104WL User Manual

5.6.4.3 Upgrade

1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the DVR's
USB port.
2. Click Select File button to choose the firmware file in your USB flash drive, then Click OK.
3. Click Upgrade button to start system upgrade. The system upgrade will last around 5-10
minutes, please do
upgrade.

5.6.4.4 Parameter Management

You can export the main menu settings you have configured to a USB flash drive, or import an
exported setting file from USB flash drive to the DVR.
Save Settings: Click to save the DVR current system settings to the USB device. You will be
required to input the Admin password to authenticate.
Load Settings: Once you have created a system settings export, you can import the settings on
another DVR. Click Load Settings
import from your USB flash driver. You will be required to input the Admin password to
authenticate.
NOT power off the DVR or remove the USB from DVR during firmware
button to navigate to the system settings file you want to
72
USER MANUAL