Motion - Value-Top VT-1104WL User Manual

5.1.5 Motion

This menu allows you to configure motion parameters. When motion has been detected
by one or more cameras, your DVR will alert you to a potential threat at your home. It does this by
sending you an email alert with an attached image from the camera to use as a reference (if this
option is enabled) and/or sending push notifications via the mobile app.
Setup: Click icon into the setup page.
Switch: Enable or disable motion detection.
Sensitivity: Set the sensitivity level. Level 1 the lowest sensitivity level while level 8 is the highest
sensitivity level.
Motion Detection Area:
The whole screen is marked for motion
detection (red blocks) as default. If you
want to disable the motion detection on a
certain area, click the grid cursor and
then drag the mouse to highlight the
scope to unmark the area into
transparent blocks. After setting is
completed, click the right button of your
mouse to return and click
the area setup effective.
26
USER MANUAL
Save to make