Value-Top VT-1104WL User Manual page 13

USER MANUAL
Subnet Mask: Subnet mask is a network parameter which defines a range of IP addresses that
can be used in a network. If IP address is like a street where you live then subnet mask is like a
neighborhood. The subnet address also consists of four groups of numbers, separated by periods.
For example, "255.255.000.000".
Gateway: This address allows the DVR to access the Internet. The format of the Gateway
address is the same as the IP Address. For example, "192.168.001.001".
DNS1/DNS2: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually should
be enough just to enter the DNS1 server address.
Port
Web Port: This is the port that you will use to log in remotely to the DVR (e.g. using the Web
Client). If the default port 80 is already taken by other applications, please change it.
Client Port: This is the port that the DVR will use to send information through (e.g. using the
mobile app). If the default port 9000 is already taken by other applications, please change it.
This is the port that the DVR will be allowed to transmit real-time streaming to other
RTSP Port:
device (e.g. using a streaming Media player.).
If you want to log in remotely to the DVR using Web Client, you need to complete the port
UPNP:
forwarding in your router. Enable this option if your router supports the UPnP. In this case, you do
not need to configure manually port forwarding on your router. If your router does not support
UPnP, make sure the port forwarding is completed manually in your router.
PPPoE
This is an advanced protocol that allows the DVR to connect to the network more directly via DSL
modem.
Check the "Enable PPPOE" box, and then enter the User name & Password of the PPPoE.
3G
This is a prior using the mobile network, you need to connect a 3G dongle to the DVR.
Enable the 3G option, enter the APN, Dial Code, User name & password according to the
instruction of your 3G dongle device.
8