Value-Top VT-1104WL User Manual page 30

2) PTZ control panel will be displayed.
1
5
8
9
No. Icon
1
2
3
4 Speed
5
- ZOOM +
6 - FOCUS +
- IRIS +
7
8 Total
9 No.
10 Time
11 Save
12
13
14
10 11
Item Description
Channel Click to select the channel of the PTZ camera.
Start / stop PTZ cruise by preset points. Make sure you had
Cruise
enable the Cruise function for this channel in
If you have chosen protocol for this channel as COAX1 or
UTC COAX2, the UTC menu button will be display. Click this icon to
Menu enter UTC OSD menu. It is also the confirm button for your
selection in the UTC OSD menu.
Speed Adjust the PTZ speed
A) Click the direction arrow to select the direction of the PTZ
camera
Pointer B) Click up/down/left/right arrow to move cursor in UTC OSD
Panel menu
C) Click
Zoom Click to zoom in/out.
Focus Click to adjust the focus
Iris Click to adjust the iris setting
PRESET To display or hide the preset point panel
Total Display the total number of preset points
No. Number of preset point
Time Set the time how long the camera will stay in the preset point
Save Click to save the settings and preset points
Enter the number of a specific preset point, click this button to
set
move your PTZ camera to the preset point
Delete Click to delete the selected preset point
Click to set a specific preset point on a PTZ camera.
Go to
You can add up to 255 preset points for the DVR.
2 3
4
to switch to auto pan mode
25
USER MANUAL
6
7
12
13
14
5.1.4 PTZ.