Value-Top VT-1104WL User Manual page 41

1. Choose one of the Rule Number. It is the number of SOD area. Maximum 4 areas you can set
for SOD function.
2. To enable the detection in Rule Switch.
3. Choose a Rule Type.
Legacy: DVR will only detect the left-over objects;
Lost: DVR will only detect the lost objects;
Legacy & Lost: DVR will detect both left-over & lost objects.
4. Use your mouse to click 4 points in the camera picture to draw a virtual region. The sharp of
the region should be a convex polygon. Concave polygon will be not able to save.
5. Click Save to save your settings.
6. If you want to adjust the size of the region, click the red box in the region, the borders of the
region will be changed to red color. Long press the left button of your mouse to move the
whole region, or drag the corners to resize the region.
7. If you want to remove one of the regions from the camera picture, click the red box in the
region and then click Remove button. Click Remove All will delete all regions.
Notice:
1) The area for detection shall be greater than or equal to the size of the detected object, such as
the detection of a white bottle.
2) The detected object cannot be covered.
36
USER MANUAL