Pir; Ptz Linkage - Value-Top VT-1104WL User Manual

Post Recording: You can set how long alarm record will last when alarm ends (30s, 1minutes,
2minutes, 5minutes).
Show Message: Display the alarm messages on the screen when sensor is triggered.
Send Email: Set to send email to specified email when sensor is triggered.
Full Screen: When sensor is triggered, the corresponding channel will be switched to the full
screen mode.
FTP Upload: To upload alarm images to FTP server when I/O alarm is triggered. To enable FTP,
please view 5.4.4 FTP.

5.3.3 PIR

Operation is same as

5.3.4 PTZ Linkage

If you had connected the PTZ cameras, you can set the linkage between PTZ cameras and Motion
Alarm and/or external I/O sensor alarm. With the linkage function, you can turn your PTZ cameras
focus to the preset point when a motion or I/O alarm happens.
Switch: Enable or disable the PTZ linkage function.
Motion: Motion detection alarm will trigger the PTZ linkage function it is checked.
IO: IO alarm will trigger the PTZ linkage function it is checked.
PTZ: Click icon to associate the PTZ cameras with preset points. View preset point at
PTZ control.
5.1.6 PIR
49
USER MANUAL
5.1.4.1