Value-Top VT-1104WL User Manual page 32

Click Alarm button to configure the motion detection alarm function:
Buzzer: The DVR can use its internal buzzer to emit an alarm tone. You can set the buzzer
duration in seconds when the motion is detected.
Alarm Out: Optional function. If your DVR support to connect to external alarm device, you can
set to emit an alarm tone.
Latch Time: To configure the external alarm time when motion is detected.
Record: Click icon and choose which channel(s) you want to record when the motion
detection is triggered.
Post Recording: You can set how long after an event occurs that the DVR will continue to record.
The recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Show Message: Check the box to display
detected.
Email: You can let the DVR to send you an auto-email when the motion is detected.
Send
Screen: If this function is enabled and a motion is detected in a channel, you will see that
Full
channel in full screen.
Upload: To upload alarm images to FTP server when motion is detected. To enable FTP,
FTP
please view 5.4.4 FTP.
icon on the live view screen when the motion is
27
USER MANUAL