Pid (Perimeter Intrusion Detection) - Value-Top VT-1104WL User Manual

USER MANUAL

5.1.8.1 PID (Perimeter Intrusion Detection)

Perimeter Intrusion Detection function detects people, vehicle or other objects which enter and
loiter in a pre-defined virtual region, and some certain actions can be taken when the alarm is
triggered.
Channel: Select the channel you want to configure
Switch: Enable or disable the PID function
Buzzer: Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the
detection is triggered
Sensitive: The sensitivity level is from 1 to 4. Higher sensitivity will be easier to trigger
the detection.
Scene setting includes Indoor and Outdoor. Please choose the scene to
Scene:
match with the place your camera installed.
Post Recording: You can set how long after an event occurs that the DVR will continue to record.
To configure the external alarm time when the detection is triggered.
Latch Time:
If your DVR support to connect to external alarm device, you can set to emit an alarm
Alarm Out:
tone.
Show Message: A letter "S" will be displayed on the screen when the PID function is triggered.
Send Email: If an alarm is triggered, an Email will be sent to your preset email account.
When the detection is triggered, the channel will be enlarged into full screen.
Full Screen:
Record Channel: to select the channel(s) you want to record when a detection is triggered.
Area: Click [Setup] to draw a virtual region in the camera picture.
31