Device; Disk - Value-Top VT-1104WL User Manual

USER MANUAL

5. 5 Device

In this section, you can configure the internal HDD & Cloud storage function.

5. 5.1 Disk

This menu allows you to check & configure the internal HDD(s). You need to format the HDD only
at the first startup and if you replace a new HDD.
Format HDD: Select the HDD you want to format and then click Format HDD. To start formatting,
you need to enter your user name and password and then click OK to confirm to continue
formatting.
Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full. For
example, if you choose the option 7 days then only the last 7 days recordings are kept on the HDD.
To prevent overwriting any old recordings, select OFF. If you have disabled this function, please
check the HDD status regularly, to make sure the HDD is not full. Recording will be stopped if HDD
is full.
Record on ESATA: This menu only displayed when your DVR is coming with an e-SATA port on
the rear panel. It will allow to record the video to external e-SATA HDD to enhance your HDD
capacity. If the e-SATA recording function is enabled, e-SATA backup function will be disabled.
multiple edit icon appears in your system, you can click it
If your DVR supports to install HDDs, the
to edit the HDD as below:
58