Lcd (Line Crossing Detection) - Value-Top VT-1104WL User Manual

5.1.8.2 LCD (Line Crossing Detection)

Line Crossing Detection function detects people, vehicle or other objects which cross
a pre-defined virtual line, and some certain actions can be taken when the alarm is
triggered.
Channel: Select the channel you want to configure
Switch: Enable or disable the LCD function
Buzzer: Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the
detection is triggered
Sensitive: The sensitivity level is from 1 to 4. Higher sensitivity will be easier to trigger the
detection.
Scene: Scene setting includes Indoor and Outdoor. Please choose the scene to match with the
place your camera installed.
Post Recording: You can set how long after an event occurs that the DVR will continue to record.
Latch Time: To configure the external alarm time when the detection is triggered.
Out: If your DVR support to connect to external alarm device, you can set to emit an alarm
Alarm
tone.
Show Message: A letter "S" will be displayed on the screen when the LCD function is triggered.
Send Email: If an alarm is triggered, an Email will be sent to your preset email account.
Screen: When the detection is triggered, the channel will be enlarged into full screen.
Full
Record Channel: to select the channel(s) you want to record when a detection is triggered.
33
USER MANUAL